In a Flue Gas Desulfurization (FGD) plant, an agitator is typically used in the absorber vessel to enhance the contact between the flue gas and the absorbent slurry, which is typically a limestone or lime-based solution. The agitator plays a crucial role in promoting the chemical reactions that remove sulfur dioxide (SO2) from the flue gas.
The agitator in an FGD plant enhances the efficiency of the flue gas desulfurization process by facilitating the absorption of sulfur dioxide from the flue gas into the absorbent slurry.
Advantage
Using this equipment has many advantages, such as :
• Safety
• Reliability
• Process optimization
• Easy, cost effective and quick maintenanc
Agitator Specifications
Motor Brand | Optional (ABB / SEW / SIEMENS / Domestic high-quality ) |
Reducer Brand | Optional ( SEW / ABB / FALK / REXNORD / Domestic high-quality ) |
Motor Power | 0.37~110KW |
Dia. of Shaft | 30~500mm |
Length of Shaft | 200~30000mm |
Rotate Speed | 0.2~600rpm |
Impeller | Efficient traditional impeller |
Material | Carbon Steel, Nickel-base alloy, Duplex-and Super Duplex Steels, Titanium and Titanium alloys, Rubber Coatings, PO, PE, PP, PTFE |
Sketch
In a Flue Gas Desulfurization (FGD) plant, an agitator is typically used in the absorber vessel to enhance the contact between the flue gas and the absorbent slurry, which is typically a limestone or lime-based solution. The agitator plays a crucial role in promoting the chemical reactions that remove sulfur dioxide (SO2) from the flue gas.
The agitator in an FGD plant enhances the efficiency of the flue gas desulfurization process by facilitating the absorption of sulfur dioxide from the flue gas into the absorbent slurry.
Advantage
Using this equipment has many advantages, such as :
• Safety
• Reliability
• Process optimization
• Easy, cost effective and quick maintenanc
Agitator Specifications
Motor Brand | Optional (ABB / SEW / SIEMENS / Domestic high-quality ) |
Reducer Brand | Optional ( SEW / ABB / FALK / REXNORD / Domestic high-quality ) |
Motor Power | 0.37~110KW |
Dia. of Shaft | 30~500mm |
Length of Shaft | 200~30000mm |
Rotate Speed | 0.2~600rpm |
Impeller | Efficient traditional impeller |
Material | Carbon Steel, Nickel-base alloy, Duplex-and Super Duplex Steels, Titanium and Titanium alloys, Rubber Coatings, PO, PE, PP, PTFE |
Sketch