Online Exporter Manufacturer Of Agitator - Finned Tube – KeHeng
Online Exporter Manufacturer Of Agitator - Finned Tube – KeHeng Detail:
Fin tubes are used wherever electric power is generated or raw materials are refined and where efficient cooling is required. Fin tubes are needed in a constantly increasing quantity for the production of heatexchangers, condensers, coolers and furnaces. The great increase of thermal efficiency when applying fin tubes allows substantial reduction in costs of cooling equipment. The surface of such tubes is substantially increased and as a result, less tubes are required compared with exchangers with plain tubes.
According to the wing shape and structure, finned tube can be divided into the following categories:
Square finned tube
Spiral finned tube
Longitudinal Finned Tube
Helical Serrated Finned Tubes
Inner finned tube
Specification of finned tube
|Base Tube O.D
|Base Tube Thickness (mm)||Fin Height (mm)||Fin Thickness(mm)||Fin NO.(Pc)|
|25.4 mm ~152.4 mm||1.0 mm ~4.0 mm||5.0 mm ~16.0 mm||0.89 mm ~1.5 mm||2 ~ 36|
|Base Tube Material||Fin Material||Tube Length (Mtr)|
|Carbon Steel ,Alloy Steel ,Stainless Steel||Carbon Steel ,Alloy Steel ,Stainless Steel||≤ 15Mtrs|
Production of finned tube
Longitudinal Finned Tube produces by high frequency resistance welding fins in the longitudinal direction with the length of the tubes. Fin strip material shall be compatible with and suitable for standard frequency resistance welding to the specified tube material. Before applying the fins, the tube outside surface shall be properly prepared to ensure that the fin-to-tube weld is sound. The fin strip is first bend into U-shaped channel, so that each leg of the U will be a fin. The channels cut into the suitable length and oriented along the length of the tubes and resistance welded in place. The channels weld in pairs, diametrically opposed — therefore the number of fins specified always be a multiple.
For a given pipe or tube size, the desired heat transfer surface area per unit length of tubes can be obtained by specifying the appropriate fin height and/or number of fins. The maximum number of fins depend upon the tube OD – larger OD tube can accommodate more number of fins.
The operation of “cut and twisted” longitudinal finned tubes consists of cutting through the fin channels circumferentially at specified intervals along the tube length. The fins are then bent (or “twisted”) on one side of each cut, creating a discontinuity that promotes turbulent fluid flow, thereby enhancing heat transfer efficiency.
Application of finned tube
The choice of longitudinal finned tubes VS helical finned tubes seems to be governed mainly by geometric considerations. For example, some heater configurations consist of finned tubes inserted inside other tubes, longitudinal finned tubes are the obvious choice for such applications. In other cases, users prefer longitudinal finned tubes for installations where the tube will be oriented in a vertical direction — the fin orientation facilitates fluid drainage on the fin side of the tube.
Like welded helical finned tubes, this welded steel configuration can be used for practically any heat transfer application, and is particularly suited to high temperature, high pressure applications. The important features of this configuration are efficient, effective bond of fin to tube under all conditions of temperature and pressure, and ability to withstand high fin-side temperatures.
Advantages of finned tube
Provide 8 to 12 times the heat transfer area of bare tubes.
More efficient than bare tubes.
Provide smaller exchangers due to increased Heat Transfer area.
Often provide a more economical selection.
Fins can be ”Cut & Twist” to increase shell side fluid turbulence and improve heat transfer.
For rapid quoation, please send requirement included:
Number of pieces
Base Tube: diameter, thickness, length and material specification
Fins: height, thickness, number, length, material specification and unfinned ends.
Packing and Handling:
The correct packing of finned and studded tubes is extremely important to guarantee their safe transportation to the final destination. Finned sheets and studded parts are very sensitive to any impact during shipping. KeHeng takes full responsibility for the safe packaging of these products. We normally use wooden crates, steel crates, and wooden boxes for packaging, after which the crates or boxes can be loaded into inter-modal containers for maritime transport or onto trucks for overland transportation.
Product detail pictures:
Related Product Guide:
Difference Between Stand Mixers and Hand Mixers
Comparing the Best Stand Mixers on the Market
Our merchandise are broadly identified and trusted by end users and can satisfy continually developing economic and social requires for Online Exporter Manufacturer Of Agitator - Finned Tube – KeHeng, The product will supply to all over the world, such as: Hyderabad , Provence , Haiti , We have got constantly insisted on the evolution of solutions, spent good funds and human resource in technological upgrading, and facilitate production improvement, meeting the wants of prospects from all countries and regions.
By Roxanne from Riyadh - 2016.02.28 14:19
The accounts manager made a detailed introduction about the product, so that we have a comprehensive understanding of the product, and ultimately we decided to cooperate.
By Athena from Chile - 2015.02.08 16:45